![]() ![]() the CPU was watering between 4.7 GHz and 1.4 GHz Windows was registering a constant 3.6 GHz though. if you have 1 or 3 ram stick you get half the speed you could get with 2 or 4 stickĪfter changing my bios settings and running a test on OCCT I was experiencing severe throttling at a firing 70 C during the test, I don't want to put the processor through a 12 hour form of that, I might try again with my case side taken off and a massive box fan next to my PC to suck the hot air out. Also its a dual channel controller so the best thing is to have 2(or4) ram stick of the same memory size for better ram speed. Try using only 2 ram stick.The more ram stick you have, the more demanding it is for the memory controller and this can affect the stability. these should not get pass 65-70 degrees celcius under heavy load (Prime95 or aida64 stability test or gaming) or you will get stability issues. ![]() Since then i have no more crash on wake up or when i game.īe sure to look at the right cpu temps and the VRM temps. Took me a while but i got my Fx-9590 to be full stable for 24h on prime95 at 4.7Ghz no turbo boost on a 360mm aio kit. You have to set the cpu the same way as a 8350 that is overclock to 4.7Ghz. Did you tune your bios setting? The stock setting are usually not good for this processor. I have this processor and i also had some stability issues when i installed it. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
September 2023
Categories |